1. Press the "Menu" key on the remote control to enter the "Main Menu" interface and select "System Settings";
2. Enter the password "9999";
3. Select "Installation and Signal Detection" (default selection) in the "System Settings" interface, and press the "Confirm" key of the remote controller twice. Stand behind the satellite antenna and let the front of the satellite antenna rotate slowly from due south to the satellite direction (it is recommended to rotate at a slower speed than the second hand of the watch). During the rotation, always pay attention to the changes of "signal strength" and "signal quality" in the debugging interface of satellite receiver on TV, and stop when the indicating signal turns green, indicating that the satellite has been initially identified and locked;
4. Network connection settings. IP setting:114.251.156.067, port setting: 4567 or 04567;
5. The area code is set to the first six digits of the local ID number;
6. Turn off the power of the set-top box, insert the mobile phone card and smart card, and then turn it on;
7. Select "Base Station Information" in the system settings and press OK;
8. Wait for the satellite machine to automatically search the mobile base station information, and automatically list the base station information according to the signal strength of the base station;
9. Wait for the base station information to pop up and the scanned base station information will appear on the TV, and click the orange button "Save and Confirm";
10. In the channel screen, the dialog box "Smart card is not opened. Do you want to install it? Select OK to install. Select "Return to Play Free Program", and then press "OK" to open and install it.
1 1. A message box will automatically pop up later, prompting "Sending succeeded". After exiting the menu, you will be prompted "Please wait … for installation" in the upper right corner of the screen, and "Installation successful" will pop up automatically after 2-3 minutes. If this message pops up, please wait patiently for about 10 minutes;
12, the program will be played automatically later, and you can watch TV normally after authorization is completed.
E06 is displayed when the account is installed. Sorry, the smart card is not authorized. How to solve it? The solution is as follows: the account is shut down due to the arrears of the set-top box, and the smart card prompts that it is not authorized; At this time, you need to contact the local TV service provider to renew the fee and re-authorize it to return to normal. The server has been upgraded, but the set-top box has not been upgraded synchronously, so the authorization data of the smart card has expired, indicating that there is no authorization; In this case, you need to contact the local TV service provider, and the customer service staff will send the authorization data to the set-top box online, and it will return to normal after refreshing the authorization data. The smart card is not authorized due to the failure of the set-top box or smart card. This situation can only be solved by contacting the local TV service provider to detect, repair or replace the set-top box or smart card.
The difference between home connection and cable TV;
At present, HuHutong has 57+ 1 test * * 58 programs, including Central1-15, a provincial satellite TV. Of course, this is not the final number of programs. It is reported that whether HuHutong will charge an annual fee for high-definition programs in the future is still being explored.
There are differences in cable TV programs in different regions, which can be roughly divided into two types, one is the original analog signal, and the other is the digital signal that is widely used now. Analog signals directly enter the cable TV air of the user's TV set, and mainly receive CCTV, provincial satellite TV and local channels in this province and this city. A digital set-top box is needed to adopt digital signals, which has more programs than before and can receive new digital channels from the central government, such as fishing channels and reading channels.
The main reasons are:
1. The user's set-top box is turned off due to arrears, and the smart card prompts that it is not authorized; At this time, you need to contact the local TV service provider to renew the fee and re-authorize it to return to normal.
2. The server is upgraded, but the set-top box is not upgraded synchronously, which leads to the expiration of the authorization data of the smart card, indicating that it is not authorized; In this case, you need to contact the local TV service provider, and the customer service staff will send the authorization data to the set-top box online, and it will return to normal after refreshing the authorization data.
3. The smart card is not authorized due to the failure of the set-top box or smart card. This situation can only be solved by contacting the local TV service provider to test, repair or replace the set-top box or smart card.
E04 appears on HuHutong's set-top box. Excuse me, how to deal with this channel without authorization? Fortunately, it has been interrupted for a long time and needs to be re-authorized. The method is:
Edit the short message "04# (smart card number of set-top box)" and send it to 0 1067689456. It will be normal after a few minutes of booting.
Hisense account e06 Sorry, the smart card is not authorized. 1 When the set-top box is not powered on, install SIM card and smart card on the set-top box; 2. Install the set-top box antenna, connect the set-top box with the TV, and connect the set-top box with the satellite receiver. 3 turn on the TV and set-top box, and set up the set-top box through the remote control. Click the menu key of the remote controller, select system settings, and enter the password "9999" to enter the settings; 4 Enter the network connection settings, set the IP to "114.251.156.067", and set the port to "4567". After confirmation, save it (if the port setting box of individual set-top boxes needs five digits, please click "4567". 5. Exit the menu and debug the satellite (209 degrees southwest) receiver to get the test signal (color bar signal, channel number is generally 999); 6. A yellow prompt page appears on the TV screen, and after displaying the base station information (5 lines), click the corresponding color (red or orange) button on the remote controller according to the screen prompt to save; 7 After waiting for a period of time (set-top boxes of different manufacturers will ...
Why does the user-defined set-top box display E 1 1 smart card failure when installing? This situation is that the smart card has poor contact or the smart card chip is damaged. Turn off the set-top box, pull out the smart card, and then plug it in again. If it fails, contact the seller.
E06 appears in the account. Sorry, what if the smart card is not authorized? Solution: The first time you use the set-top box, you need to open the card. The specific method is as follows:
1. Press the "Menu" key on the remote control to enter the "Main Menu" interface and select "System Settings";
2. Enter the password "9999";
3. Select "Installation and Signal Detection" (default selection) in the "System Settings" interface, and press the "Confirm" key of the remote controller twice. Stand behind the satellite antenna and let the front of the satellite antenna rotate slowly from due south to the satellite direction (it is recommended to rotate at a slower speed than the second hand of the watch). During the rotation, always pay attention to the changes of "signal strength" and "signal quality" in the debugging interface of satellite receiver on TV, and stop when the indicating signal turns green, indicating that the satellite has been initially identified and locked;
4. Network connection settings. IP setting:114.251.156.067, port setting: 4567 or 04567;
5. The area code is set to the first six digits of the local ID number;
6. Turn off the power of the set-top box, insert the mobile phone card and smart card, and then turn it on;
7. Select "Base Station Information" in the system settings and press OK;
8. Wait for the satellite machine to automatically search the mobile base station information, and automatically list the base station information according to the signal strength of the base station;
9. Wait for the base station information to pop up and the scanned base station information will appear on the TV, and click the orange button "Save and Confirm";
10. In the channel screen, the dialog box "Smart card is not opened. Do you want to install it? Select OK to install. Select "Return to Play Free Program", and then press "OK" to open and install it.
1 1. A message box will automatically pop up later, prompting "Sending succeeded". After exiting the menu, you will be prompted "Please wait … for installation" in the upper right corner of the screen, and "Installation successful" will pop up automatically after 2-3 minutes. If this message pops up, please wait patiently for about 10 minutes;
12, the program will be played automatically later, and you can watch TV normally after authorization is completed.
What if HuHutong's set-top box is not authorized? The radio and television in your area are not allowed to install household registration.
The account number shows e06. Sorry, the smart card is not authorized. Please contact the installation and maintenance personnel. 1 What should I do? Press the "Menu" button on the remote control to enter the "Main Menu" interface and select "System Settings";
2. Enter the password "9999";
3. Select "Installation and Signal Detection" (default selection) in the "System Settings" interface, and press the "Confirm" key of the remote controller twice. Stand behind the satellite antenna and let the front of the satellite antenna rotate slowly from due south to the satellite direction (it is recommended to rotate at a slower speed than the second hand of the watch). During the rotation, always pay attention to the changes of "signal strength" and "signal quality" in the debugging interface of satellite receiver on TV, and stop when the indicating signal turns green, indicating that the satellite has been initially identified and locked;
4. Network connection settings. IP setting:114.251.156.067, port setting: 4567 or 04567;
5. The area code is set to the first six digits of the local ID number;
6. Turn off the power of the set-top box, insert the mobile phone card and smart card, and then turn it on;
7. Select "Base Station Information" in the system settings and press OK;
8. Wait for the satellite machine to automatically search the mobile base station information, and automatically list the base station information according to the signal strength of the base station;
9. Wait for the base station information to pop up and the scanned base station information will appear on the TV, and click the orange button "Save and Confirm";
10. In the channel screen, the dialog box "Smart card is not opened. Do you want to install it? Select OK to install. Select "Return to Play Free Program", and then press "OK" to open and install it.
1 1. A message box will automatically pop up later, prompting "Sending succeeded". After exiting the menu, you will be prompted "Please wait … for installation" in the upper right corner of the screen, and "Installation successful" will pop up automatically after 2-3 minutes. If this message pops up, please wait patiently for about 10 minutes;
12, the program will be played automatically later, and you can watch TV normally after authorization is completed.
Installation tip of Huhutong: E06 Sorry, the smart card is not authorized, please contact the installation and maintenance personnel. Use the mobile phone card to locate, install and receive authorization, and there is an installation process on the box.
Take a look.
If you need help, ask again.